K2 Paste

The chemical K-2 is available in 3 forms as follows giving the same results. Application of K-2 Passivation solution is a must after the application of all forms of K-2 chemical in order to avoid further corrosion and contamination

It is used to clean weld seams and the areas surrounding the welds.

HOW TO APPLY K - 2 PASTE

1. S1-56 - Degreaser (Removal of oil 50gm/lit.) Apply liquid S1-56 - Degreaser on to the surface for
5- 10 minutes. Then wash the surface thoroughly with water.
2. K-2 paste is to be applied on the weld seam and surrounding area with a brush.
3. Leave the K-2 paste on the weld seam for 15-45 minutes depending on the thickness of the oxide scale.
4. Scrub the surface with a plastic bristled brush and then wash surface thoroughly with water.
5. Apply K-2 passivation on the surface and leave it for 10 – 15 minutes.
6. Wash the surface thoroughly with water.